phreak
PSA
Since this library was written, RX14 and others have integrated many of Phreak's features into OptionParser
, the CLI builder in the standard library. I'm thrilled to see that these changes have been made, but Phreak now brings much less to the table than it did in it's hayday.
So, before using Phreak, please check out OptionParser
's updated feature set - you likely don't need a library at all!
Phreak
Phreak is a CLI builder in the style of Crystal's builtin OptionParser. It aims to provide greater flexibility by integrating subcommands natively, all while retaining a very simple callback based code style.
If you use Phreak in a project, please let me know! I'd love to see what you've made, and would be happy to put your project in the examples section. (My email address is in my github profile.)
Table of contents
Features
- Basic flags
- Automatic documentation
- Subcommands
- Nested subcommands
- Command types
- Fuzzy matching
- Compound flags
- Default actions
- Basic error handling
- Advanced Help Menus
- Error bubbling
- Reusable parsers
- Planned features
Much like OptionParser, Phreak makes registering commands incredibly easy:
Basic commands
require "phreak"
Phreak.parse! do
# This will respond to the arguments "-a" or "--flag1"
root.bind(short_flag: 'a', long_flag: "flag1") do
puts "Someone called?"
end
end
Automatic Documentation
You can also attach a description to a command to easily print a help menu. These are optional, but documenting a CLI as you work is rather convenient.
require "phreak"
Phreak.parse! do |root|
# Sets the helpmenu banner for `root`
root.banner = "A cli."
root.bind(short_flag: 'd', long_flag: "do-nothing",
description: "Has no effect.") do
end
root.bind(short_flag: 'h', long_flag: "help",
description: "Prints a help menu.") do
# Printing a `Subparser` (the objects that Phreak yields) will
# display a formatted help menu showing the commands bound to that
# object and their descriptions. In this case, as `root` is bound to
# two things, both will be printed with invocation instructions and
# descriptions.
puts root
end
end
The block above, when invoked cli -h
, will print the following menu:
A cli.
Commands:
--do-nothing, -d Has no effect.
--help, -h Prints a help menu.
There are some more advanced formatting tricks that can be used, here - see advanced help menus for more information. Also, for more information about how to use these menus in a more complex way, see nested subcommands.
The above two features capture most of the scope of OptionParser. However, you're probably here for more extensive functionality! Let's get to the good stuff.
Subcommands
Phreak allows you to create clear, human-readable CLIs with ease, thanks to subcommands.
require "phreak"
Phreak.parse! do |root|
root.bind(word: "throw") do |sub|
# Responds to "./binary throw -p" or "subcommand throw --party"
sub.bind(short_flag: 'p', long_flag: "party") do
puts "Whoo!"
end
end
root.bind(word: "info") do |sub|
# Responds to "./binary info -d" or "subcommand info --dogs"
sub.bind(short_flag: 'd', long_flag: "dogs") do
puts "dogs are just incredible."
end
end
end
Nested subcommands
Building on that more fluent subcommand syntax mentioned above, Phreak also lets you create heirarchical commands (think nmcli device wifi connect ...
, for example).
require "phreak"
Phreak.parse! do |root|
root.bind(word: "wifi", description: "Configure or control wireless connections.") do |wifi|
wifi.banner = "Manage wireless connections. Invocation: cli wifi [subcommand]"
wifi.bind(word: "status", description: "Get the current status of the modem.") do
# Reponds to "nested wifi status"
end
wifi.bind(word: "set", description: "Set the the wifi state.") do |set|
# Responds to "nested wifi set"
end
wifi.bind(word: "help",
description: "display specific help about the `wifi` subcommand.") do |help|
puts wifi
end
end
root.bind(word: "help", description: "display this help menu.") do |help|
puts root
end
end
This command also demonstrates how to use documentation with nested commands! Each subcommand has a help command defined on it, which allows invocation like ./binary help
for general help, or ./binary wifi help
for more specific information!
Command types
Phreak allows you to create three primary types of commands:
- Short flags (e.g.
ls -a
) - Long flags (e.g.
ls --all
) - Words (e.g.
git push
)
You can alias one of each to a command in one line, too:
require "phreak"
Phreak.parse! do |root|
root.bind(short_flag: 'a', long_flag: "all", word: "all") do
# Responds to -a, --all, or 'all'
end
end
Fuzzy matching
Phreak allows you to fuzzy match commands as desired! For example:
require "phreak"
Phreak.parse! do |root|
root.fuzzy_bind(word: "enable") do |sub, match|
# Responds to words close to enable - enab, enablt, for example
puts "Fuzzy matched #{match}"
end
end
Compound flags
Many CLIs allow flags to be stacked to run several processes in a row. For example, ls -al
tells ls to print all files in a long format.
require "phreak"
Phreak.parse! do |root|
root.bind(short_flag: 'a') do
puts "A!"
end
root.bind(short_flag: 'b') do
puts "B!"
end
root.bind(short_flag: 'c') do
puts "C!"
end
end
Given the above program, compiled to binary:
./binary -abc # Prints "A!B!C!"
./binary -ac # Prints "A!C!"
./binary -bbb # Prints "B!B!B!"
Default actions
In some cases, CLIs should have a default behaviour only when no arguments are provided. Phreak makes that easy:
require "phreak"
Phreak.parse! do |root|
root.default do
puts "no arguments provided"
end
end
Basic error handling
Phreak makes it easy to detect incorrect usage of your CLI.
require "phreak"
Phreak.parse! do |root|
root.bind(word: "say") do |sub|
sub.bind(word: "hi") do
puts "Hi!"
end
end
root.default do
puts "No arguments provided"
end
root.missing_args do |apex|
puts "Missing an argument after #{apex}"
end
root.unrecognized_args do |arg|
puts "Unrecognized argument: #{arg}"
end
end
Here, if we run ./binary say
, the missing_args
handler will be called. If we ran ./binary say goodbye
, the unrecognized_args
handler would be run. If we don't provide an argument at all, the default
handler is called. Finally, if we correctly invoke ./binary say hi
, the CLI will print out "Hi!"
Advanced Help Menus
Help menus can be tweaked in many ways. All the configuration is done on a per-subparser basis, which allows help menus to be tailored to subcommands. As described before, subparsers can be given a custom command title with the banner
property:
subparser.banner = "this is a command"
Indentation, too, can be configured. Below is a snippet of Subparser.cr
showing the relevant properties:
# An optional banner to display in the autogenerated help menu.
property banner : String | Nil
# The left indentation unit used in printing default help menus.
property help_indent : String = " " * 4
# The minumum width (word, long flag, and spaces) of the command section of
# the default help menu.
property command_section_width : Int8 = 30
# If the command section exceeds the width defined above, the fallback
# padding will be added to ensure there is at least some separation
# between command and description.
property fallback_description_padding : String = " " * 4
Error bubbling
Due to the way that Phreak works, you can actually bind a missing_args
or unrecognized_args
handler to any part of a nested command. For example:
require "phreak"
Phreak.parse! do |root|
root.bind(word: "say") do |sub|
sub.bind(word: "hi") do
puts "Hi!"
end
sub.bind(word: "hello") do |sub|
sub.bind(word: "tomorrow") do
puts "Sure thing!"
end
sub.missing_args do
puts "Hello!"
end
sub.unrecognized_args do |arg|
puts "When's #{arg}?"
end
end
sub.unrecognized_args do |arg|
puts "I can't say #{arg}!"
end
end
end
Let's see what happens in a few example inputs:
./binary say hi
- The binding for 'say' is recognized, and a
Subparser
(thesub
variable) is created. - The binding for 'hi' is invoked, and the program terminates.
./binary say goodbye
- The binding for 'say' is recognized.
- None of the bindings match 'goodbye', so the
unrecognized_args
handler onsay
is invoked.
./binary say hello
- The binding for 'say' is recognized.
- The binding for 'hello' is recognized.
- We tell the
Subparser
to bind the word 'tomorrow' to a callback, but we're out of keywords! - The
missing_args
handler is invoked in the scope of the 'hello' binding. - The handler says hello!
The lattermost case may seem very similar to the default
handler, but there are some important differences. default
is only ever called if the size of the arguments array is zero (there are absolutely no arguments). It can also only be bound to the root Parser
(which is actuallly a Subparser+
).
Errors also bubble - that is, if we had not defined a missing_args
handler on 'hello', Phreak would then try to invoke a missing_args
event on 'say', then on the root subparser. If no handlers are found on the traversal back up, an exception is raised.
Reusable parsers
What we've seen above is incredibly useful for non-interactive CLIs, but it isn't always the case that you want to throw away your parser after the first use. Here's an example of how you can make an interactive CLI with Phreak:
require "phreak"
# Ignore this variable for now - it is specific to this example.
running = true
# This doesn't actually run the parser at all -
# it just returns a convenient handle to it.
parser = Phreak.create_parser do |root|
root.bind(word: "create") do |sub|
sub.grab do |sub, name|
puts "Creating partition #{name}"
end
end
root.bind(word: "quit") do
puts "Exiting."
running = false
end
end
puts "Disk formatting utility"
# Here's where we will actually run the parser!
while running
# Print a prompt, then read the next line.
printf ">> "
next_line = gets || ""
parser.parse(next_line.split(" "))
end
This example is quite different than the others, but it showcases some fascinating things. We are creating a reusable parser using Phreak.create_parser
, and creating our bindings once. Then, later in the program, we are repeatedly calling that parser on the user's input. When the user enters the 'quit' command, the matching endpoint is run in the parser, which sets running
to be false, thus terminating the loop.
Here is some example output:
Disk formatting utility
>> create p1
Creating partition p1
>> foobar
Unrecognized command foobar.
>> create
The command create requires more parameters.
>> quit
Exiting.
Planned features
- Autogenerated documentation (at compile time)
- Autogenerated fish completions
- Typo fix suggestions (did you mean 'commit'?)
Check out the project Trello for more.
Installation
-
Add phreak to your
shard.yml
:dependencies: phreak: github: shinzlet/phreak
-
Run
shards install
Examples
I wrote sd using Phreak! It was a great case study of what features I needed to add to get a truly flexible CLI builder.
Development
Please see phreak's vivisection for an overview of how Phreak works under the hood!
Contributing
- Fork it (https://github.com/your-github-user/./fork)
- Create your feature branch (
git checkout -b my-new-feature
) - Commit your changes (
git commit -am 'Add some feature'
) - Push to the branch (
git push origin my-new-feature
) - Create a new Pull Request
Contributors
- shinzlet - creator and maintainer
phreak
- 33
- 1
- 2
- 1
- 0
- over 3 years ago
- September 2, 2019
MIT License
Sat, 21 Dec 2024 21:42:13 GMT