Linux CI Version License

EventHandler

EventHandler is a full-featured event library for Crystal.

It supports:

  1. Defining events
  2. Defining handlers that will run in response to events
  3. Emitting (triggering) events

Each handler can run synchronously or asynchronously, run one or more times, and be added at the beginning or end of queue, or into a specific position.

Subclassing events is also supported, as well as sending events through Channels and blocking/waiting for events.

Installation

Add the dependency to shard.yml:

dependencies:
  event_handler:
    github: crystallabs/event_handler
    version: ~> 1.0

Usage in a nutshell

Here is a basic example that defines and emits events. More detailed usage instructions are provided further below.

require "event_handler"

# Define an event named ClickedEvent with two arguments
EventHandler.event ClickedEvent, x : Int32, y : Int32

class MyClass
  include EventHandler

  def initialize
    # Define a handler that will run in response to the event
    on(::ClickedEvent) do |e|
      puts "Clicked on position x=#{e.x}, y=#{e.y}"
    end
  end
end

# Trigger the event on the object:
my = MyClass.new
my.emit ClickedEvent, 10, 20 #=> "Clicked on position x=10, y=20"

Or another example:

require "event_handler"

# Define an event inside a namespace (MyClass::TestEvent)
class MyClass
  include EventHandler
  event TestEvent, message : String, status : Bool
end

my = MyClass.new

# Add a Proc as event handler
handler = ->(e : MyClass::TestEvent) do
  puts "Activated on #{e.class}. Message is '#{e.message}' and status is #{e.status}"
end
my.on MyClass::TestEvent, handler

# Emit the event
my.emit MyClass::TestEvent, "Hello, World!", true
#=> Activated on MyClass::TestEvent. Message is 'Hello, World!' and status is true

# Remove the handler
my.off MyClass::TestEvent, handler

# Or remove all handlers for an event at once
my.off MyClass::TestEvent

Documentation

Defining events

An event can be defined via the convenient event macro or manually.

Using event creates an event class which inherits from base class EventHandler::Event:

EventHandler.event ClickedEvent, x : Int32, y : Int32

It is a shorthand for the following line:

class_record ClickedEvent < ::EventHandler::Event, x : Int32, y : Int32

(class_record is EventHandler's variant of Crystal's macro record; it creates classes instead of structs.)

If additional modification to the class is necessary, class can be reopened:

EventHandler.event ClickedEvent, x : Int32, y : Int32

class ClickedEvent < EventHandler::Event
  property test : String?
end

Or the whole event class can be created manually; it only needs to inherit from EventHandler::Event:

class ClickedEvent < EventHandler::Event
  getter x : Int32
  getter y : Int32
  property test : String?
  def initialize(@x, @y)
  end
end

Subclassing also works as expected:

EventHandler.event ClickedEvent, x : Int32, y : Int32

class DoubleClickedEvent < ClickedEvent
end

Adding event handlers

Event handlers can be added in a number of ways.

Using a block:

my = MyClass.new

my.on ClickedEvent do |e|
  p "Hello"
end

Using a Proc:

my = MyClass.new

# With Proc ->(){} syntax
handler = ->(e : ClickedEvent) do
  p "Hello"
  nil
end

# With Proc.new syntax
handler = Proc(ClickedEvent, Nil).new do |e|
  p "Hello"
end

my.on ClickedEvent, handler

Using an aliased type for Proc called Handler, eliminating the need to repeat type information:

my = MyClass.new

handler = ClickedEvent::Handler.new do |e|
  p "Hello"
end

my.on ClickedEvent, handler

Using an existing method:

my = MyClass.new

def on_clicked(e : ClickedEvent) : Nil
  p "Hello"
end

my.on ClickedEvent, ->on_clicked(ClickedEvent)

Using a variation of the last example, where if an object method is used, self is preserved as expected:

class MyClass
  include EventHandler
  event ClickedEvent, x : Int32, y : Int32

  def on_clicked(e : ClickedEvent)
    p "Hello", e.x, e.y, self
    nil
  end
end
my = MyClass.new

my.on ClickedEvent, ->my.on_clicked(ClickedEvent)

Using a handler "wrapper" object explicitly (otherwise it would be created and used implicitly):

my = MyClass.new

handler = ->(e : ClickedEvent) do
  p "Hello"
  nil
end
wrapper = EventHandler::Wrapper.new(handler: handler, once: false, async: false, at: -1)

my.on ClickedEvent, wrapper

Using a variation of the last example with an aliased type for Wrapper:

my = MyClass.new

# With block
wrapper = ClickedEvent::Wrapper.new(once: false, async: false, at: -1) do |e|
  p "Hello"
end

# With Proc
handler = ->(e : ClickedEvent) do
  p "Hello"
  nil
end
wrapper = ClickedEvent::Wrapper.new(handler: handler, once: false, async: false, at: -1)

my.on ClickedEvent, wrapper

Using a variation of the last example, where wrapper object is obtained from a call to on() and then reused to add the same handler the second time:

my = MyClass.new

handler = ->(e : ClickedEvent) do
  p "Hello"
  nil
end

wrapper = my.on ClickedEvent, handler

my.on ClickedEvent, wrapper

Using a Channel:

my = MyClass.new

# With Channel(T)
channel = Channel(ClickedEvent).new

# With an aliased type
channel = ClickedEvent::Channel.new

my.on ClickedEvent, channel

When on is invoked with a channel, it implicitly creates and adds an event handler which forwards received events into the channel.

Event handler options

All of the above methods for adding handlers support arguments once, async, and at.

once specifies whether the handler should run only once and then be automatically removed. Default is false. In the future this option may be replaced with times which specifies how many times to run before being removed.

As a convenience for adding handlers that should run only once, there is a method named once available instead of the usual on. These two calls are equivalent:

my.on ClickedEvent, handler, once: true, async: true, at: -1

my.once ClickedEvent, handler, async: true, at: -1

async specifies whether a handler should run synchronously or asynchronously. If no specific value is provided, global default from EventHandler.async is used. Default (EventHandler.async?) is false. You can either modify this default, or specify async on a per-on basis.

at specifies the index in the list of handlers where new handler should be inserted. While it is possible to specify the exact position, usually this value is 0 (EventHandler.at_beginning) to insert at the beginning or -1 (EventHandler.at_end) to insert at the end of list. Default is EventHandler.at_end.

Emitting events

Events can be emitted using emit in one of three ways:

By listing the event class and arguments one after another:

my.emit ClickedEvent, 10, 20

By listing the event class and event instance one after another:

my.emit ClickedEvent, ClickedEvent.new 10, 20

By creating an event instance and providing it as the single argument:

my.emit ClickedEvent.new 10, 20

The handler methods will always receive one argument - the event object with packed arguments. The return value from emit is that object.

Handling events

As mentioned, handlers always receive one argument - the event object with packed arguments.

When an event is emitted using any of the available variants, such as:

my.emit ClickedEvent, x: 10, y: 20

The arguments are directly accessible as getters on the event object:

my.on ClickedEvent do |e|
  puts "Clicked on position x=#{e.x}, y=#{e.y}"
end

Return values

All handlers are defined with Nil as their return type and their return value is ignored.

my.on ClickedEvent do |e|
  p "Hello"
end

If event handlers should produce a return value, the recommended way is to subclass Event into one that contains a return value, which the handlers will update:

require "event_handler"

class EventWithRetval < ::EventHandler::Event
  property return_value : Int32 = 0
end

class_record ClickedEvent < EventWithRetval, x : Int32, y : Int32

class MyClass
  include ::EventHandler
end
c = MyClass.new

c.on(ClickedEvent) { |e| e.return_value += e.x + e.y }

event = c.emit ClickedEvent, 1,2
p event.return_value #=> 3

c.emit ClickedEvent, event
p event.return_value #=> 6

c.emit event
p event.return_value #=> 9

Please note the above example will work correctly as long as event handlers are invoked synchronously. Running one or more handlers asynchronously and checking for the return value after all handlers have finished execution is currently not addressed as part of built-in functionality.

Inspecting event handlers

To inspect the current list of installed handlers for an event, use handlers:

my.handlers ClickedEvent

my.handlers(ClickedEvent).size

my.handlers(ClickedEvent).empty?

Please note that handlers exposes the Array containing the list of handlers.

Modifying the array will directly modify the list of handlers defined for an event. This should only be done with due caution.

Removing event handlers

Event handlers can be removed in one of five ways:

By handler Proc:

handler = ClickedEvent::Handler.new do |e|
  p "Hello"
end

my.on ClickedEvent, handler
my.off ClickedEvent, handler

By handler hash:

handler = ClickedEvent::Handler.new do |e|
  p "Hello"
end

hash = handler.hash

my.on ClickedEvent, handler
my.off ClickedEvent, hash

By handler wrapper object:

handler = ClickedEvent::Handler.new {
  p "Hello"
}

wrapper = my.on ClickedEvent, handler
my.off ClickedEvent, wrapper

Internally, handlers are always removed from events by removing their wrapper object.

When wrappers are created implicitly by on, each invocation of on gives handler a new wrapper object even if the same handler is added multiple times for the same event. A call to off() will find the first instance of this handler, then remove all instances of its wrapper from the list (there will be only one), and then invoke RemoveHandlerEvent with that instance as argument. If a handler is added to an event more than once, it will be necessary to call off() multiple times to remove all instances.

When handlers are added by using their wrappers directly, multiple identical wrapper objects will be present in the list. When off() is used to remove such handlers, all instances of their wrapper will be removed from the list (there will be more than one) and RemoveHandlerEvent will be invoked with the last removed instance as argument.

Whether off(Event, handler | hash) should be removing handlers by wrapper (like it does now) or by handler, and whether off() should remove all instances (like it does now) or at most one, is still being considered.

By handler index in the handlers Array:

my.off ClickedEvent, at: 0

By removing all handlers at once:

# With off
my.off ClickedEvent

# With remove_all_handlers
my.remove_all_handlers ClickedEvent

When all handlers are removed at once, RemoveHandlerEvents will be emitted as expected, and any multiple identical wrappers will be removed according to the above-documented behavior. If emitting RemoveHandlerEvent events should be disabled when removing all handlers, provide argument emit to off or remove_all_handlers, or use EventHandler.emit_on_remove_all? and EventHandler.emit_on_remove_all= to change the default behavior.

Meta Events

There are three built-in events:

AddHandlerEvent - Event emitted after a handler is added for any event, including itself.

RemoveHandlerEvent - Event emitted after a handler is removed from any event, including itself.

AnyEvent - Event emitted on any event. Adding a handler for this event allows listening for all emitted events and their arguments.

As mentioned, a wrapper object is implicitly created around a handler on every on, to encapsulate the handler and its subscription options (the values of once?, async?, and at). When AddHandlerEvent or RemoveHandlerEvent are emitted, they are invoked with the handlers' Wrapper object as argument. This allows listeners on these two meta events full insight into the added or removed handlers and their subscription data.

Channels

Emitted events can also be sent through Channels. EventHandler comes with convenience types and functions for this purpose:

Channels can be created with Channel(T) or an aliased type:

# With Channel(T)
channel = Channel(ClickedEvent).new

# With an aliased type
channel = ClickedEvent::Channel.new

Invoking on with a Channel argument will implicitly create a handler that forwards emitted events to the Channel:

my.on ClickedEvent, channel, async: true

The same behavior can also be implemented manually:

channel = Channel(ClickedEvent).new

my.on ClickedEvent, async: true do |e|
  channel.send e
end

A complete example:

require "event_handler"

EventHandler.event ClickedEvent, x : Int32, y : Int32

class My
  include EventHandler
end
my = My.new

# Create a channel, wait for event, and print it
channel = ClickedEvent::Channel.new
my.once ClickedEvent, channel, async: true
my.emit(ClickedEvent, 1,2)
p channel.receive

# Same as above, implemented manually
channel = Channel(ClickedEvent).new
my.once ClickedEvent, async: true do |e|
  channel.send e
end
my.emit(ClickedEvent, 1,2)
p channel.receive

Waiting for events

Using Channels, it is also possible to wait for events.

The above example already shows blocking on channel.receive. The same effect can be achieved using convenience method wait and avoiding visible use of Channels:

e = my.wait(ClickedEvent)

wait can also be invoked with code. The accepted syntax and arguments are the same as for once:

# With a block
my.wait ClickedEvent do |e|
  p "Hello"
end

# With a Proc
handler = ClickedEvent::Handler.new do |e|
  p "Hello"
end
my.wait ClickedEvent, handler

# With a method
def on_clicked(e : ClickedEvent) : Nil
  p "Hello"
end
my.wait(ClickedEvent, ->on_clicked(ClickedEvent))

When waiting for events with code, two handlers are involved:

The first, visible one is the handler provided to wait, containing code to execute once the event arrives. wait argument async controls whether this handler will run synchronously or asynchronously after the event has been waited. This is consistent with the usual behavior and the default value is false (EventHandler.async?).

The other, implicit one is the handler automatically created and added to the list of event handlers. Once the event is emitted and this handler runs, it will forward the received event into the Channel. wait argument async_send controls whether the event emitter will block on channel.send or it will execute it in a new fiber. The default value is false (EventHandler.async_send?).

Subclassing

Event classes can be subclassed with no restrictions:

require "event_handler"

EventHandler.event ClickedEvent, x : Int32, y : Int32

class DoubleClickedEvent < ClickedEvent
end

class TripleClickedEvent < DoubleClickedEvent
  def initialize(@x : Int32, @y : Int32)
    @z = 0
  end

  def initialize(@x : Int32, @y : Int32, @z : Int32)
  end
end

class My
  include EventHandler

  def initialize
    on(ClickedEvent)       {|e| p e }
    on(DoubleClickedEvent) {|e| p e }
    on(TripleClickedEvent) {|e| p e }
  end
end

my = My.new
my.emit ClickedEvent, 1, 2
my.emit DoubleClickedEvent, 3, 4
my.emit TripleClickedEvent, 5, 6
my.emit TripleClickedEvent, 7, 8, 9

Here is an example of an Event subclass that counts the number of times the event was instantiated:

require "event_handler"

abstract class EventWithCount < ::EventHandler::Event
  class_property count : UInt64 = 0

  def initialize
    @@count += 1
  end
end

class ClickedEvent < EventWithCount
  getter x : Int32
  getter y : Int32
  def initialize(@x, @y)
    super()
  end
end

class My; include EventHandler end
my = My.new

4.times { my.emit ClickedEvent, 1, 2 }

p ClickedEvent.count #=> 4

API documentation

Run crystal docs as usual, then open file docs/index.html.

Also, see examples in the directory examples/.

Testing

Run crystal spec as usual.

Also, see examples in the directory examples/.

Thanks

  • All the fine folks on Libera.Chat IRC channel #crystal-lang and on Crystal's Gitter channel https://gitter.im/crystal-lang/crystal

  • Blacksmoke16 for a workable event model design

  • Asterite, Absolutejam, and Tenebrousedge for additional discussion

Other projects

List of interesting or similar projects in no particular order:

Licensing

For licensing to use in your next project, consider https://perens.com/2020/10/06/post-open-source-license-early-draft/ and https://licenseuse.org/.

Repository

event_handler

Owner
Statistic
  • 31
  • 0
  • 0
  • 8
  • 0
  • almost 2 years ago
  • November 11, 2019
License

GNU Affero General Public License v3.0

Links
Synced at

Wed, 06 Nov 2024 12:43:37 GMT

Languages